May I introduce...

Our Effect-Colour Reflec

They are coming…the grey and the dreary days…

Safety first in traffic…

With our “reflec” colour safety can be guaranteed…Whether sports-, leisure-, or children´s wear, whether shoulder bags or safety dog necklaces – prints with this ink are giving safety guarantees. Both versions, the silver one and the transparent one as well are common in one aspect- they do have a very high reflective power. The silver one is high opaque and permanent visible. The transparent version is nearly invisible under normal light conditions, but unfolds its full effect under exposure to light. You can also use it for effective overprints in combination with our ”Sebaflex”- system.

Description

Reflec 110 is a waterbased screenprinting colour with a reflection effect. This colour reacts as soon as it is illuminated with light. The colour shade is silver and obviously to see… That´s why it is ideally suited for prints on safety clothes. The transparent version is ideal for using it as an effective overprint. This colour is based on our “Sebaflex-textile-system”, that´s why they are suitable for printing on cotton and many synthetic substrates.

Special properties

  • High reflection power
  • High opacity on the silver version
  • Overprints possible with the transparent version
  • Good abrasion resistance
  • Surface ironing resistance
  • Free from phathalates, PVC, APEO, formaldehyde
  • Fulfil the most exigent requirements of the Oeko- Tex- standard Class 1.

Print recommendation

Mesh 36-43

Thinning

The inks are ready to use

Drying

The colours are drying under normal room temperature conditions and they are stackable after a short time.

Important!!! “Crosslinker 105” has to be used to improve the adhesion and wash resistance (add 3%)!!! Fixing the prints can be done in addition with 3 minutes under a temperature of 150°-170°.

Emulsion

Emulsion for waterbased coloursystems is recommended

Cleaning

Water can be used, make sure you do it immediately after the printing process

Ammonia can be used also for cleaning (water ­+ 5 %), rinse with warm water after cleaning process.

Our Effect-Colour Sebapuff

Sebapuff 115 is a waterbased textile printing ink which will produce soft 3D effects with a suede hand feel. Result is a print with a relief-structured optics. It has a matte and soft surface finish. Because of its foaming texture Sebapuff is suitable for printing on light materials as well as it is for printing on dark materials. Free from phthalates, PVC, APEO and formaldehyde it fulfils the most exigent requirements of the Oeko- Tex- standard Class 1.

Special properties

  • Suitable for Cotton and blend poly cotton blends
  • Soft handle
  • Good wash resistance
  • Very good surface resistance
  • Stable to high temperatures
  • Does not show any yellowing
  • Free from phthalates, PVC, APEO and formaldehyde
  • Fulfil the most exigent requirements of the Oeko- Tex- standard Class 1.

Print recommendation

Mesh 34-43

Dilution

The inks are ready to use

Drying and Foaming

The ink has to be printed flat and starts drying under normal room temperature conditions. The foaming process only works if you put heat on it with a temperature of 120°-150° for about 3 minutes. Using the “Crosslinker 106” (add the drying time1%), is recommended to reduce the drying time to 1,5 -2 minutes and also to improve the general fastness properties.

Emulsion

Emulsion for waterbased coloursystems is recommended

Cleaning

Water can be used, make sure you do it immediately after the printing process. Ammonia can be used also for cleaning (water ­+ 5 %), rinse with warm water after cleaning

Our Effect-Colour Discharge

Large prints on dark textiles with an absolutely soft handle…

High opaque and brilliant results with only one print…Sounds fantastic, doesn’t it?

With our “Discharge” exactly this is possible…

The Discharge printing paste is a special colour that works differently from your normal printing paste. Usually the image is created by the application of the colour to the fibre, wherein this case it is created through colour removal. The two components of the Discharge printing paste are the base and the activator which removes the colour pigments from the printing-material. What you will see in the result is the original colour of the crude fiber. Meaning, the colour etches the print. If more colour is what you are looking for…

Our pre-pigmented versions of the Discharge printing paste are not only able to etch, but dye the fiber too. As a result, you have a vintage style effect to your work as the appearance has a softened feel on the surface.

Description

Discharge 113 is a water based discharge ink without odour and formaldehyde with a very soft handle. Usually the image is created by the application of the colour to the fibre, wherein this case it is created through colour removal. What you will see in the result is the original colour of the crude fiber. Our pre-pigmented versions of the Discharge printing paste are not only able to etch, but dye the fiber too.

Special properties

  • Very bright and uniform prints with a good colour yield
  • The prints fulfil the most exigent requirements (Oeko Tex 100 Class 1)
  • Soft handling
  • Excellent screen stability
  • The prints are iron-proof
  • Suitable for wet on wet printing
  • Low odour

Printing recommendations

Mesh 34 up to and including 90

Printing preparation

The Discharge ink should always be combined with the activator

The amount depends on the discharge ability of the garment colour. Not all dyes, used for colouring garments, are destructible with the activator (for more information consult your garment supplier).

Dispensing

Discharge Base: 100 g + Discharge activator: 6-8 g

Crosslinker 105 can improve wash resistance while printing hues, the transparent base does not need any Crosslinker 105

Drying and etching process

The colour is drying under normal room temperature conditions and is stackable after a short time. The etching process only works on heat supply. When using a continuous dryer, the fixing will take 3-4 min under 180°.Successful results can also be achieved when using an ironing press or a usual iron.

Emulsion

Emulsion for water based colour systems is recommended

Cleaning

Water can be used, make sure you do it immediately after the printing process

Ammonia can be used also for cleaning (water ­+ 5 %), rinse with warm water after cleaning process.

Squeegee

A medium hard 75 shore is recommended

Coverage

Depending on the colour, screen to be used, the average coverage is around 40-50 m2/L